Filear - filear.com
General Information:
Latest News:
Electric Hobby RC Cars for the Absolute Beginner 4 Jun 2013 | 10:25 am
I found gathering all the info needed to dive into RC cars as a hobby kind of confusing. It helps a lot to have a mentor that you can ask questions but that is not always possible. I’m cheep, I will ...
How to Solder for the beginner 4 Jun 2013 | 08:33 am
Here are some good practices when soldering electronics.
How to terminate RJ45 connectors on Cat5 Ethernet cable 31 May 2013 | 03:02 am
Making Cat5 Ethernet cables or repairing the ends is quite easy. You will need a RJ45 connector, a crimper, and some strippers or a knife to strip the shield. Strip the outer shield while taking car...
DIY The Most Useless Machine 2 Feb 2013 | 07:30 pm
The useless machine is a simple box with a switch and motor, when you turn on the switch the lid opens and the arm swings out and turns off the machine and then retracts. It is so simple but brings a ...
Keyless entry remote programming for 1998-2006 GM, Chevrolet, GMC 18 Aug 2012 | 07:40 am
If you get a new keyless entry remote (key fob) or change the battery in your remote you may need to reprogram your vehicle to accept the remote. This procedure works for a lot of 1998, 1999, 2000, 20...
Keyless entry remote programming for Ford 1995-2008 15 Aug 2012 | 05:23 am
If you get a new remote or change the battery in your remote you may need to reprogram your vehicle to accept the keyless entry remote or key fob. This procedure works for a lot of 1998-2008 ford vehi...
RepRap Prusa Mendel V2 Complete Build 4 Jul 2012 | 03:35 am
Introduction Building my very first 3D printer was quite traumatic and time consuming but also fun and rewarding! I don’t suggest building your own unless you have a love for tinkering, and making. T...
RepRap Prusa Mendel V2 Complete Build 4 Jul 2012 | 03:35 am
Introduction Building my very first 3D printer was quite traumatic and time consuming but also fun and rewarding! I don’t suggest building your own unless you have a love for tinkering, and making. T...
Netduino VB button tutorial and Event Handlers 26 May 2012 | 04:19 pm
Programming a button press with VB and your @Netduino, Event handlers and interrupt ports. In this tutorial I show how to program the Netduino to light up the onboard LED when the button is pressed, I...
Netduino VB button tutorial and Event Handlers 26 May 2012 | 12:19 pm
Programming a button press with VB and your @Netduino, Event handlers and interrupt ports. In this tutorial I show how to program the Netduino to light up the onboard LED when the button is pressed, I...
