Diysecurityforum - diysecurityforum.com

General Information:

Latest News:

Re: Ademco 4219 Zone Extender not recogized 27 Aug 2013 | 03:52 pm

^^ they all got it. make sure the EZM is set to address 7 using the dip switches. in *56, input type must be "aux wire". if you're using zone doubling, though, it's a different story. hardwired zon...

Re: Few questions about Ademco 4140xmp 27 Aug 2013 | 03:49 pm

well if you did a default (*97) on the panel, anything programmed would be lost. all addressable devices would have to be reprogrammed. most Ademco polling loop devices start with 41 or 42 in the mo...

Tuxedo/Total Connect/Thermostat Scene problem 27 Aug 2013 | 09:00 am

Objective: To have the thermostats set to 'Setback' mode when the system is 'Armed Away' and return to their normal schedule when the system is 'Disarmed.' I have a Tuxedo Touch WiFi, Total Connect 2...

Re: Few questions about Ademco 4140xmp 27 Aug 2013 | 07:59 am

So it looks like polling loop is an easy way to go for. I will test it with one PIR first to see how it works.

Re: Alert Protective Services installer code? 27 Aug 2013 | 07:33 am

Thanks again for the info. So this makes me think that the ADC url or ip address must be part of the cellular module, not the panel itself? Also there must be some ID associated with the panel or th...

Re: Alert Protective Services installer code? 27 Aug 2013 | 03:47 am

If using ADC cellular module leave the CS values empty that is only for telephone/POTS communication. Reset Q45 to (0) Reset Q44 to (0) Reset (if applicable) Q48 to (000000) Q48 is for telephone/POT...