Iforgeiron - iforgeiron.com
General Information:
Latest News:
John Larson's Blog - 1065 25 Jun 2013 | 03:49 am
In a very long day I not only made the pieces for die mounting on the 150, but I also shipped the Malibu 75. I made the dovetail pin for the sow block and the wedge to hold it. The pin is pretty long ...
Jim123's Blog - Rasp spurs 24 Jun 2013 | 11:33 am
Just made these. Would like to know how to put silver initials on band, can anyone help. cheers Attached thumbnail(s)
John Larson's Blog - 1064 22 Jun 2013 | 03:07 am
I finished the 150 plumbing and got it reciprocating. Used standard operations described here before many times. Ideal weather. No interruptions. Onward to die mounting and treadle building.
John Larson's Blog - 1063 20 Jun 2013 | 03:47 am
Worked at home until 7:00 am and then head to the shop. At home I painted the walls above and beside he shower stall, picked up debris for the landfill, etc. At the shop I worked at the 150's plumbing...
John Larson's Blog - 1062 19 Jun 2013 | 03:27 am
I've been hosting a home remodeler who has been installing a new shower stall. Pretty much finished today, below budget, and high quality workmanship. Made contact with his friend who can help do some...
John Larson's Blog - 1061 17 Jun 2013 | 12:25 am
The 150 now has the hammer head inside the cabinet and in the V-guides. Another big job completed. To get there today I removed the aerofoil lifting eye temporarily and laid out and mag drilled the fo...
John Larson's Blog - 1060 15 Jun 2013 | 11:53 pm
The 150's hammer head is in finished form. It has taken quite a few hours to be able to say that. Tomorrow the plan is to complete the 2-axis pivot assembly and magnetically drill the 4 holes for the ...
John Larson's Blog - 1059 14 Jun 2013 | 03:55 am
I spent most of the day cleaning up and organizing 50-taper tooling. I had to go to the machine shop store to buy a replacement Mil-tec 2" cutter that I broke for the third time (not repairable this t...
John Larson's Blog - 1058 13 Jun 2013 | 02:35 am
I spent the day at the milling machine, first finishing the bottom disk to 8-7/8 facet diameter and then using it to guide the cutting of the hammer head. The first set of passes took off about 1/4", ...
John Larson's Blog - 1057 12 Jun 2013 | 02:49 am
The hammer head was welded together this morning. The tig Miller Synchrowave 350 kept tripping the 60 amp single phase breaker. HMMN. It never did that before. I tried cooling fans, lower max amperage...
