Microchip - forum.microchip.com - Microchip
General Information:
Latest News:
Test on not bitwised union member allways true (amperLab) 26 Aug 2013 | 11:04 am
Hello everybody, I have an issue when i try to test the complement of a port bit by using union bit fields. eg : the following code doesn't work if((~(PORTDbits.RD0))==1) {ClrWdt();} and produce the r...
XC8 compiler not inserting bank select? (bluewave) 25 Aug 2013 | 10:47 am
Hello My knowledge of C is recent and basic, but I have been using baseline PICS with ASM for a while. I have some XC8 code that is not working as expected - specifically, I am simply trying to incr...
__delay_us(0.5); is giving me an error. "Unable to resolve identifier (si2030) 25 Aug 2013 | 10:03 am
Hi there, I posted this on Electro Tech online and while they were able to tell me this is a linker problem I was unable to resolve it. I have had very little time on MPLAB XC8 and downloaded a exam...
16f1509 and UART giving problems (ForceMaster) 24 Aug 2013 | 10:46 am
Hi. Have for months tried to get this setup to Work, Everything Works ok, execpt from 1 Little thing, After the 16f1509 have recieved exact 512 incomming data from UART, it just stops responding. Here...
Power hungry radio module screwing up my op amp! (kw) 24 Aug 2013 | 07:42 am
So I have a radio module that consumes 40mA more when transmitting than when it is not transmitting. It transmits several hundred times a second. I see that when it is transmitting, the opamp output (...
PIC32MX250 minimal breadboard setup + PICKit 3 (josef.van.niekerk@gmail.com) 23 Aug 2013 | 07:59 am
I'm not really sure if this question belongs in the General PIC32 Topics category, or under Programmers (MPLAB PM3, PICSTART Plus, PICkit 2, PICkit 3), so admin, do feel free to move it. I'm attempti...
PIC16F1829 - Using pin RA5 as a basic output for an LED (jmay91) 22 Aug 2013 | 05:47 pm
Hi, I'm having a problem getting pin RA5 on the micro to control an LED on a board that I have made up. The board is set up correctly and free of shorts, for if i put power to the pin on the micro, t...
PIC 18F66K22 problem (smaciejowski) 21 Aug 2013 | 05:43 pm
Maybe someone can give me an insight into a problem I've been having with my embedded controller. I have an 18F66K22 programmed with an MPLAB ICD 3 with the code protection bits turned "on". I have ov...
Question about !SS in 16F872 firmware (MHPower) 19 Aug 2013 | 10:01 pm
I am interfacing a MAX6952 with a 16F872 using SPI (firmware version), in Assembly language. I have reviewed the SPI section of the datasheet several times and it sheds no light on the procedure to ut...
MDDFS SD Card Improvements (cgiordan) 19 Aug 2013 | 05:52 pm
I have been evaluating Microchip's MDDFS using an SD card, and it gets awful performance. The reason I believe that it significantly lacks performance ie because it doesn't perform multi-block reads/w...
