Ultimaker - forum.ultimaker.com
General Information:
Latest News:
Nylon Problems 27 Aug 2013 | 03:21 pm
Hi, I've been using the Taulman 645 nylon for a few weeks now and I am have 2 major issues with it. Firstly, it keeps jamming in the nozzle. meaning after every few prints one will fail and ...
"Processing" - in the shop - Is it shipped? 27 Aug 2013 | 03:11 pm
I ordered my UM the 15:th and when I look at the status of the order it has been stating "Processing" for a week and a half. I wonder if there are more informational tags, like "Shipped" or someth...
We made a little show about 3D Printing & our Ultimaker 27 Aug 2013 | 05:15 am
Ok, its not exactly a video of a model...but I just finished editing and uploading a little show about 3d Printing in general featuring our Ultimaker; randomreviewshow.com (Episode 9; 3D Printing at...
Build Volume Issue 26 Aug 2013 | 02:23 pm
Hi all, The build volume quoted is 210x210x220mm so why can't I print a file which is X: 137.66mm x Y: 203.06mm x Z: 9.46mm? They model is shown grey in Cura until I click 'To Max' where it re...
Arduino - Panne de la commande de l'extrudeur 26 Aug 2013 | 01:26 pm
Bonjour à tous, J'ai mon Ultimaker depuis la mi-juillet et donc je suis débutant avec cette machine que j'ai monté moi-même. J'ai lancé vendredi une impression et lorsque je suis allé voir l'av...
Leaking filament on top of heating block 24 Aug 2013 | 09:10 am
Hi, I am a newbie. I have tried printing some sample prints. However, today I noticed liquid filament on top of the heating block during the printing process. What could be the cause? A plug o...
One or two extruders 24 Aug 2013 | 12:28 am
Hi Very new to this and currently looking at 3D printers. I think I have just about settled on the Ulitmaker but spotted the dual extruder options. Is this something that is worth going for ...
Non-constant temperature 23 Aug 2013 | 09:05 pm
Hello, I've my Ultimaker for three months now and made already a lot of good prints. Only since last week i have problems with the temperature in Cura. The temperature wont get constant anymo...
Hello from The Netherlands 23 Aug 2013 | 04:01 pm
Hello all, im Robin van der Molen an dutch (mechanical) engineer. for a living i make technical drawings (and models) of all sorts of buildings, machines etc. Since about 5 - 6 years ago I ca...
First layer not sticking - tip 23 Aug 2013 | 10:07 am
Hi all, I had some problems with the first layer not sticking to the printbed, and I was using the blue painters tape. I read somewhere the tape can be a bit greasy/oily. Simplest sulution: cl...
